Before I even open anything the fan goes to maximum and stays there.
Full fan speed straight after startup usually points to a sensor or power-management issue rather than an app. 1. Reset the SMC: shut down, unplug the power cable for 15 seconds, plug it back in, wait 5 seconds and turn on. 2. Reset NVRAM: turn on and immediately hold Option + Command + P + R for about 20 seconds. 3. Run Apple Diagnostics: turn on and hold D. Note any reference code it shows. If diagnostics reports a sensor code, or the fan is still at full speed after both resets, a temperature sensor or its cable has likely failed and needs a repair shop.